TrueZONE
Control heating and cooling comfort where you want it, when you want it. With a Temperature Zoning System from Honeywell, you won’t be heating empty rooms or over-cooling one area in order to cool another. Zoning is a comfortable, energy-efficient way to enjoy the temperature you want in every room. Think of it as controlling your heating and cooling the same way you control your lights.

Key Features
Comfort — Every home has at least two zones: the living area and the sleeping area, which are rarely used at the same time. Then, there is upstairs and downstairs, rooms that are used a lot (family rooms) and rooms that may not be used often (formal dining rooms). And, of course, someone in the family likes it warm while someone else likes it cool. Temperature zoning makes it possible for everyone to be comfortable.

Efficiency — No need for a heating and cooling system for every room.
Honeywell Zoning Systems use dampers in your ductwork that open and close as needed based on each zone’s thermostat settings. When a zone doesn’t need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. It’s that simple.

Convenience — With the flexibility of a thermostat in each zone, there’s no more cranking up the settings in one area to affect another.

Conservation — You’ll only be heating/cooling areas as needed, so you’ll be saving energy. In fact, when combined with programmable thermostats, you can save up to 33 percent off your energy bills with a temperature zoning system.

• Intuitive Installer Setup Easy-to-follow, digital display uses real language to guide installer through four easy steps.

• Universal Application-TrueZONE panels work with virtually any brand equipment for zone control of conventional, heat pump or dual fuel systems.

• Standardized Checkout Procedure standardizes the checkout process so that every installer checks out in the same way, every time to ensure that all zones are operating correctly before leaving the jobsite. (HZ432 and HZ322 only)

• Robust Push Terminals wire in literally half the time compared to screw terminals — with no screwdriver required. Plus, wires lock-in to the terminals for a tight fit.

• Common-Sense LEDs indicate which zones are calling, what stage they are calling for (heat/cool) and when the emergency heat is on.

• Patented wire channel allows installer
to run wires on the side, top, bottom or backside of the panel and wire anchors help hold wires in place.

• Smaller Footprint gives installer the ability to mount TrueZONE panels anywhere — on the return duct, studs or wall next to the system. All panels are eight inches wide.

• Variable-Speed Fan Control reduces blower speed in cooling when one zone is calling.

• Discharge Air Temperature Staging downstages equipment when discharge air temperature is near the limit. (HZ432 and HZ322)

• Advanced Dual-Fuel Operation — Offers dual-fuel changeover based on outdoor temperature and/or thermostat staging. (HZ432 only)

EnviraZONE
Did you know that the average person breathes 3400 gallons (12,870 liters) of air each day and spends 90% of that day inside?

Indoor air quality products from Honeywell are designed to help make your home more comfortable—from zoning products that allow you to control the temperature in individual areas of the home to humidifiers and comfort control centers that help balance the moisture content of your indoor air.

Honeywell is proud to be a partner of the American Lung Association® Health House® program that provides guidelines for constructing homes with improved air quality and ventilation.

Key Features
Comfort — Every home has at least two zones: the living area and the sleeping area, which are rarely used at the same time. Then, there is upstairs and downstairs, rooms that are used a lot (family rooms) and rooms that may not be used often (formal dining rooms). And, of course, someone in the family likes it warm while someone else likes it cool. Temperature zoning makes it possible for everyone to be comfortable.

Efficiency — No need for a heating and cooling system for every room.
Honeywell Zoning Systems use dampers in your ductwork that open and close as needed based on each zone’s thermostat settings. When a zone doesn’t need to be heated or cooled, the dampers close to save energy and maximize comfort elsewhere. It’s that simple.

Convenience — With the flexibility of a thermostat in each zone, there’s no more cranking up the settings in one area to affect another.

Conservation — You’ll only be heating/cooling areas as needed, so you’ll be saving energy. In fact, when combined with programmable thermostats, you can save up to 33 percent off your energy bills with a temperature zoning system.*

• Controls up to three stages heat and two stages cooling of single-stage, multi-stage, conventional, or heat pump.

• Controls up to three zones and can be expanded up to nine zones with two W8703A DIM.

• Uses VisionPRO® IAQ communicating thermostats for manual or automatic changeover by zone

• Supports dehumidification, humidification and ventilator controls.

• Purge timer protects equipment between calls for heat or cool with choice of panel or HVAC equipment controlled fan.

• System and zone damper LEDs indicate system and damper status.

• Individual zone fan control.

• Supports C7835 Discharge Air Temperature Sensor for capacity control with adjustable high and low limits and equipment failure indication.